Jeep Wrangler2018 Owner's Manual page 23

1-3 – Back Cover Pry Points
2. Remove the depleted battery by inserting a small flat-
blade screwdriver into the battery removal slot and
sliding the battery forward and up being careful not to
damage the electronic board underneath.
GETTING TO KNOW YOUR VEHICLE 21
Battery Replacement
3. Install the new battery into the key fob, making sure the
positive (+) side is facing up. Slide the battery until it is
seated securely below the tabs.
4. Reassemble the back cover making sure it is properly
aligned before snapping it back in place.
Programming Additional Key Fobs
Programming the key fob may be performed by your
authorized dealer.
3