Mitsubishi MR-JE-10B Instruction Manual page 288

APPENDIX
(3) Difference between the China RoHS directive and the EU RoHS directive
The China RoHS directive allows no restriction exemption unlike the EU RoHS directive. Although a
product complies with the EU RoHS directive, a hazardous substance in the product may be considered
to be above the limit requirement (marked " ") in the China RoHS directive.
The following shows some restriction exemptions and their examples according to the EU RoHS
directive.
Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to
0.35% lead by weight, lead as an alloying element in aluminum containing up to 0.4% lead by weight,
and copper alloy containing up to 4% lead by weight, e.g. brass-made insert nuts
Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or
more lead)
Electrical and electronic components containing lead in a glass or ceramic other than dielectric
ceramic in capacitors, e.g. piezoelectronic devices
Electrical and electronic components containing lead in a glass or ceramic matrix compound, e.g. chip
resistors
(4) Status of our products for compliance with the China RoHS directive (Chinese)
The following shows table app. 1 in Chinese according to "Management Methods for the Restriction of
the Use of Hazardous Substances in Electrical and Electronic Products".
物质名称
部件名称
伺服放大器 电路板组件
伺服系统
散热片
控制器
树脂壳体
金属板、螺丝
伺服电机 托架
电路板组件
树脂壳体
铁心、电线
电缆 电线
加工品
连接器
选件 电路板组件
模块
树脂壳体
金属板、螺丝
注 1. : 表示该有害物质在该部件所有均质材料中的含量均在GB/T26572规定的限量要求以下。
: 表示该有害物质在该部件的至少一种均质材料中的含量超出GB/T26572规定的限量要求。
2. 根据"电子电气产品有害物质限制使用标识要求"、[SJ/T11364-2014]的表示
该标志表示在中国制造/销售的产品中含有特定有害物质。
只要遵守本产品的安全及使用方面的注意事项，从生产日算起的环保使用期限内不会造成环境污染或对人体、财
产产生深刻的影响。
该标志表示制造的产品中不含有特定有害物质。
表附.2 产品中所含有害物质的名称及含量
阈值
铅 汞
(Pb) (Hg)
基准
阈值：镉：0.01wt%(100ppm)、
有害物质 (注1)
镉 六价铬
PBB
(Cd) (Cr(VI))
镉以外：0.1wt%(1000ppm)、
App. - 23
环境保护
PBDE
使用期限标识
(注2)
包括连接器组
件
备注