Printing Waveforms; Printing Reports - ZOLL Propaq M Operator's Manual

Printing Waveforms

You can print waveforms by pressing
waveforms as configured in the Number of Traces option. The Print Number of Traces option
can be set to
Note:
The ECG Waveform
ECG waveforms are printed on a grid with major divisions (dotted lines) every 5mm and minor
divisions (single dots) every 1 mm. The ECG waveform is always printed if ECG is monitored.
The Invasive Pressure Waveform
Pressure waveforms are printed on a grid with major divisions (vertical dotted lines) every 5
mm, and the pressure scale grids are printed horizontally.
The SpO
The SpO
CO Waveform
2
CO waveforms are printed on a grid with major divisions (vertical dotted lines) every 5 mm,
2
and the pressure scale grids are printed horizontally.
RESP Waveform
Respiration waveforms are printed with major divisions (vertical dotted lines) every 5 mm.

Printing Reports

Print on Snapshot
Prints snapshot, including numerics and waveform each time a snapshot is acquired.
Print on Patient Alarm
You can print a report each time an alarm occurs. This report is called the Print on Patient
Alarm Report. The Print on Patient Alarm setting must be turned on in the Setup>Print
window.
Print on NIBP
You can print the results of an NIBP measurement each time one occurs. This report is called
the NIBP Ticket Report. The Print on NIBP setting must be turned on in the Setup>Print
window.
Print on Trend
Prints numeric trend values each time a trend data snapshot is taken.
9650-000820-01 Rev. K
, , or . Patient vital sign numerics are printed above the waveforms.
1 2 3
Waveforms that have invalid data print a dashed line for that trace.
Plethysmograph
2
plethysmograph is printed with major divisions (vertical dotted lines) every 5 mm.
2
Propaq M Operator's Guide
. The Propaq M unit will print the displayed
Printing Patient Data
16-3