Sending Disclosure Logs - ZOLL Propaq M Operator's Manual

Sending Disclosure Logs

For systems with a Disclosure log server configured, the Propaq M unit allows you to send
patient disclosure logs for up to 15 cases at one time to a remote server through a wireless
connection.
Note:
To transfer disclosure log data:
1. From the Primary Display window press the Log button (
Log Transfer quick access key (
Specify whether or not to include the current case in the transfer by navigating to and
2.
selecting:
• Close Case
transfer. When you select
a new case for the current patient. That way Pacing, Defib, and AED parameter settings
for the current patient remain intact following the transfer.
• Continue
The
Case Selection
Use the navigation keys to select Select Cases then press the Select button (
3.
highlight moves to the list of available cases to transfer.
Select up to 15 cases to include in the transfer by using the up and down navigation arrows
4.
to highlight a case then pressing the Select button (
disclosure log transfer when a check mark displays to the left of the case. The Number of
Cases Selected field indicates the number of cases currently selected.
When you are done selecting cases, press the Home/Display button (
5.
moves to the Transfer key.
With the Transfer key highlighted, press the Select button (
6.
Transfer dialog displays indicating the transfer progress.
If the Disclosure Log Transfer Failure dialog box displays, use the navigation keys to select
Retry then press the Select button (
that failed. Otherwise, if you would like to end the transfer use the navigation keys to select
Cancel then press the Select button (
When the Disclosure Log Transfer Complete dialog box displays select OK to return to the
7.
Primary Display window.
9650-000820-01 Rev. K
The Propaq M unit automatically cancels any case disclosure log transmissions when
defibrillation is activated.
if you would like to include the disclosure logs for the current case in the
Close Case
button to continue the transfer without the current case.
dialog box displays with a list of up to 150 most recent cases.
Propaq M Operator's Guide
) then press the Disclosure
LOG
). The Close Current Case? dialog box displays.
, the Propaq M closes the current case and generates
). A case is selected for inclusion in the
). The Propaq M continues the transfer from the case
) to return to the Primary Display window.
Sending Disclosure Logs
). The
). The highlight
). The Disclosure Log
15-13