12-Lead Print And Display Options; Selecting 12-Lead Acquire; Specifying The Number Of 12-Lead Print Copies - ZOLL Propaq M Operator's Manual

12-Lead Print and Display Options

The Propaq M unit provides additional 12-Lead print and display options that you can specify
through the Supervisor parameter control panels (access to Supervisor is passcode-controlled).
Press the Setup quick access key (
select the four digits in the Supervisor passcode. Press SAVE when you are finished. Once you
have entered your supervisor passcode, you will be able to access the configurable options in
the Supervisor menu.
Select the Supervisor> ECG> 12-Lead option to display the 12-Lead parameter control panel:

Selecting 12-Lead Acquire

When enabled, the unit automatically prints the 12-Lead report when you press
this feature is not enabled.

Specifying the Number of 12-Lead Print Copies

This option allows you to specify that the Propaq M unit print up to five copies of the 12-lead
waveform trace set after pressing
9650-000820-01 Rev. K
), then select Supervisor
. By default, the unit prints only one 12-lead snapshot.
Propaq M Operator's Guide
12-Lead Print and Display Options
Using the navigation keys,
.
. By default,
12
13-13