Sending A 12-Lead Report - ZOLL Propaq M Operator's Manual

Chapter 15 Communications

Sending a 12-Lead Report

When a 12-lead report has been acquired or a previously acquired 12-lead has been selected for
review, the Propaq M unit prepares the report for transmission. When this is complete, the
Transmit quick access key(
To send a 12-lead report to a preconfigured distribution list:
1. Press the 12-lead quick access key(
If desired, press the snapshot button(
2.
ECG Interpretive Analysis for more information about acquiring 12-lead data).
3. Press the 12-lead review next quick access key (
desired snapshot.
Press
4.
Use the navigation keys to highlight and select the desired distribution list. A green check
box indicates the selected list.When a destination has been selected, the Transmit button is
enabled.
Press Transmit to initiate the 12-lead transmission.
5.
While the transmission is in process, the green LED on top of the unit is illuminated and a
message appears on the screen.
15-12
) displays.
. A list of preconfigured distribution lists appears.
www.zoll.com
).
) to take a 12-lead snapshot (see Chapter 13: 12-Lead
). A list of snapshots appears; select the
9650-000820-01 Rev. K