Replacing A Battery Pack On The Propaq M Unit With Printer - ZOLL Propaq M Operator's Manual

Chapter 2 Product Overview

Replacing a Battery Pack on the Propaq M Unit with Printer

This section describes how to replace a battery pack on the Propaq M equipped with the
optional printer.
To remove a battery pack, use your fingers to grasp and raise the latch and pull the battery pack
out of the compartment.
To install a battery pack:
1. Line up the battery so it will slide into the battery well.
Push the battery into place.
2.
2-16
Removing a Battery Pack from Propaq M Unit with Printer
Installing a Battery Pack into Propaq M Unit with Printer
www.zoll.com 9650-000820-01 Rev. K