Capnography (Co2); Pulse Oximetry (Spo2) - ZOLL Propaq M Operator's Manual

Capnography (CO
CO monitoring measures the CO
2
Carbon Dioxide --EtCO
CO concentration in the gasses supplied to intubated patients (Fractional Inspired Carbon
2
Dioxide -- FiCO
serves as an indicator for rebreathing in non-intubated patients. CO
both intubated and non-intubated patients.
The EtCO
display. The EtCO
mercury (mmHg). You can also specify that the Propaq M unit display a CO
waveform trace display area.
Pulse Oximetry (SpO
Pulse Oximetry monitoring measures the oxygen saturation (SpO
peripheral site such as a finger or toe. If optional features SpCO (carboxhemoglobin saturation)
and SpMet (methemoglobin saturation) or SpHb (total hemoglobin), SpOC (oxygen content),
PVI (pleth variability index) and PI (perfusion index) are installed, it also monitors these
parameters.
SpO monitoring determines the ratio of oxygenated hemoglobin to total hemoglobin in arterial
2
blood and displays this ratio as percent SpO
features SpCO and SpMet or SpHB, SpOC, PVI and PI are installed, these values alternate and
display under the SpO
plethysmograph in the waveform trace display area.
9650-000820-01 Rev. K
)
2
2
). CO monitoring can also measure a patient's breath rate and the
2 2
). Since FiCO represents the amount of CO
2 2
, breath rate, and FiCO
2 2
and FiCO measurements can appear as values given in millimeters of
2 2
)
2
display. You can also specify that the Propaq M unit display an SpO
2
Propaq M Operator's Guide
concentration in a patient's exhaled breath (End Tidal
measurements appear in a labeled (
in a labeled (
SpO2
2
Propaq M Monitoring Functions
present during inhalation, it also
2
monitoring can be used for
2
) numeric
EtCO2
capnogram in the
2
) of arterial blood at a
2
) numeric display. If optional
2
3-3