Treatment Summary Report; Transferring Data To A Usb Device - ZOLL Propaq M Operator's Manual

Treatment Summary Report

The Treatment Summary Report is a report that shows all of the treatment events related to a
patient such as alarm events treatment snapshots.
TREATMENT SUMARY REPORT
Name: Phillip Davies
ID: Patient 0015
Start Time:
Last Event: 06/06/12
Elapsed Time: 00:29:48
Total 12 Leads:
Dept: ICU
Unit:
S/N: 0 SW: 00.00.00.00

Transferring Data to a USB Device

You can transfer patient data from the unit using a USB transfer device.
Before you begin, insert a USB device into the Propaq M USB device port.
To transfer data through the USB port:
1. Press the power switch to turn the unit on.
Press
2.
3. Press
Press the Transfer Log quick access key (
4.
device).
Note:
Use the navigation keys to select Transfer from the Transfer the Log menu.
5.
The green LED on the top of the device turns on while data is transferred to the USB device.
6.
Note:
Note:
After transferring data, you must remove the USB drive and reinsert it before attempting
another transfer. If the USB device does not establish communication with the Propaq M unit,
try powering off the unit and then on again to establish communication.
9650-000820-01 Rev. K
Patient Mode: Adult
06/06/12 06:06:14
09:43:40
# Events:
0
USB Device Port
.
LOG
.
Do not remove the USB data drive from the Propaq M unit during transfer.
Wait for the log transfer to complete and for the green light on the top of the Propaq M
to turn off before removing the USB drive.
Logging snapshots is disabled during the log transfer.
Propaq M Operator's Guide
Treatment Summary Report
06:06:14 New Case ID
06:06:14 System On
06:06:14 Patient Mode Adult
06:06:14 Some Alarm Limits Disabled
06:06:20 Self Test Passed
06:06:43 Treatment Snapshot: ASA
) (ensure that the USB drive is connected to the
14-3