Changing The Display Brightness - ZOLL Propaq M Operator's Manual

Chapter 2 Product Overview
Set Date and Time Screen with Clock Synchronization
For systems with the Clock Synchronization feature enabled, the Set Date and Time screen
indicates the date and time of the last synchronization to an external time source and allows you
to adjust the clock for Daylight Saving Time. You can choose whether to enable Daylight
Saving Time or not by selecting the Enable/Disable DST field as appropriate. Adjustments to
Daylight Saving Time take effect immediately and must be manually adjusted at every
transition between Standard Time and Daylight Saving Time. If enabled the clock will be
adjusted forward by 1 hour. These fields only display on systems with the Clock
Synchronization feature enabled. For information on Clock Synchronization, see "Configuring
Clock Synchronization" on page 15-35.
Note:

Changing the Display Brightness

The following procedure shows how to select the different brightness options.
1. Press the power switch to turn the unit on.
Press the More/Back quick access key (
2.
Press the Brightness quick access key (
3.
options until you find your selection.
Note:
2-14
When Clock Synchronization is enabled, avoid changing the unit's time manually
except at initial configuration.
Selecting a higher brightness setting (such as 70%) will deplete the battery pack at a
faster rate than when choosing a lower brightness setting (such as 30%). To select the
brightness setting, go to the Setup>Display/Volume>Display Brightness menu to
adjust the display percentage.
www.zoll.com
).
) repeatedly to toggle through the brightness
9650-000820-01 Rev. K