Cisco ASR 9000 Series Routing Configuration Manual page 655

Implementing Routing Policy
RP/0/RSP0/CPU0:router(config-rpl)# if as-path in as-path-set* then pass else drop endif
RP/0/RSP0/CPU0:router(config-rpl)# end-policy
This route policy configuration accepts routes with AS-path attributes as mentioned in the two AS-path
sets, and drops all other non-matching routes.
3 Commit your configuration.
RP/0/RSP0/CPU0:router(config)# commit
This completes the configuration of routing policy with wildcards for AS-path sets. For detailed information
on AS-path sets, see
Use Wildcards for Community Sets
Use the following example to configure a routing policy with wildcards for community sets.
1 Configure the required community sets in the global configuration mode.
RP/0/RSP0/CPU0:router(config)# community-set CSET1
RP/0/RSP0/CPU0:router(config-comm)# 12:24,
RP/0/RSP0/CPU0:router(config-comm)# 12:36,
RP/0/RSP0/CPU0:router(config-comm)# 12:72
RP/0/RSP0/CPU0:router(config-comm)# end-set
RP/0/RSP0/CPU0:router(config)# community-set CSET2
RP/0/RSP0/CPU0:router(config-comm)# 24:12,
RP/0/RSP0/CPU0:router(config-comm)# 24:42,
RP/0/RSP0/CPU0:router(config-comm)# 24:64
RP/0/RSP0/CPU0:router(config-comm)# end-set
2 Configure a route policy with wildcards to refer to the community sets.
RP/0/RSP0/CPU0:router(config)# route-policy WILDCARD_COMMUNITY_SET
RP/0/RSP0/CPU0:router(config-rpl)# if community matches-any community-set* then pass else
drop endif
RP/0/RSP0/CPU0:router(config-rpl)# end-policy
This route policy configuration accepts routes with community set values as mentioned in the two
community sets, and drops all other non-matching routes.
3 Commit your configuration.
RP/0/RSP0/CPU0:router(config)# commit
This completes the configuration of routing policy with wildcards for community sets. For detailed information
on community path sets, see
Use Wildcards for Extended Community Sets
Use the following example to configure a routing policy with wildcards for extended community sets.
1 Configure the extended community sets in the global configuration mode.
RP/0/RSP0/CPU0:router(config)# extcommunity-set rt RT_SET1
RP/0/RSP0/CPU0:router(config-ext)# 1.2.3.4:555,
RP/0/RSP0/CPU0:router(config-ext)# 1234:555
RP/0/RSP0/CPU0:router(config-ext)# end-set
RP/0/RSP0/CPU0:router(config)# extcommunity-set rt RT_SET2
RP/0/RSP0/CPU0:router(config-ext)# 1.1.1.1:777,
RP/0/RSP0/CPU0:router(config-ext)# 1111:777
RP/0/RSP0/CPU0:router(config-ext)# end-set
2 Configure a route policy with wildcards to refer to the extended community sets.
RP/0/RSP0/CPU0:router(config)# route-policy WILDCARD_EXT_COMMUNITY_SET
RP/0/RSP0/CPU0:router(config-rpl)# if extcommunity rt matches-any extcommunity-set* then
as-path-set, on page 545.
community-set, on page
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Use Wildcards For Routing Policy Sets
546.
625