Global-Inbound; Global-Outbound; Interface-Inbound; Interface-Outbound - Cisco ASR 9000 Series Routing Configuration Manual

Implementing Routing Policy

Global-Inbound

The global-inbound attach point for RIP allows you to filter or update inbound RIP routes that match a route
policy.
The following example shows how to filter the inbound RIP routes that match the route policy named rip-in:
router rip
route-policy rip-in in

Global-Outbound

The global-outbound attach point for RIP allows you to filter or update outbound RIP routes that match a
route-policy.
The following example shows how to filter the outbound RIP routes that match the route policy named rip-out:
router rip
route-policy rip-out out

Interface-Inbound

The interface-inbound attach point allows you to filter or update inbound RIP routes that match a route policy
for a specific interface.
The following example shows how to filter inbound RIP routes that match the route policy for interface
0/1/0/1:
router rip
interface GigabitEthernet0/1/0/1
route-policy rip-in in

Interface-Outbound

The interface-outbound attach point allows you to filter or update outbound RIP routes that match a route
policy for a specific interface.
The following example shows how to filter outbound RIP routes that match the route policy for interface
0/2/0/1:
router rip
interface GigabitEthernet0/2/0/1
route-policy rip-out out

RIP Attributes and Operators

This table summarizes the RIP attributes and operators per attach points.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Attach Points
605