Disabling Selective Vrf Download - Cisco ASR 9000 Series Routing Configuration Manual

Implementing BGP
Command or Action
for large
configurations.
Status report: node0_RSP0_CPU0: START TO BACKUP
Status report: node0_RSP0_CPU0: BACKUP HAS COMPLETED
SUCCESSFULLY
[Done]
Proceed with reload? [confirm]RP/0/RSP0/CPU0::This node received
reload
Step 8 exit
Example:
RP/0/RSP0/CPU0:router(admin)#exit
Step 9
show svd role
Example:
RP/0/RSP0/CPU0:router#show svd role
Tue Feb 12 07:50:26.908 UTC
Codes: (C) : user Configured role
Node Name
--------------------------------------------------------------------
0/RSP0/CPU0
0/0/CPU0
0/1/CPU0
What to Do Next
After enabling SVD using the svd platform enable command, do not use the selective-vrf-download disable
to turn off SVD.

Disabling Selective VRF Download

Selective VRF Download is disabled by default. However, if the SVD is enabled, perform these tasks to
disable the functionality.
SUMMARY STEPS
1. admin
2. configure
3. no svd platform enable
4. commit
5. show svd state
6. admin
7. reload location all
8. exit
9. show svd role
IPv4 Role
Standard
Customer Facing
Customer Facing
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
IPv6 Role
Standard
Not Interested
Not Interested
Disabling Selective VRF Download
Purpose
Exits administrator mode and enters
EXEC mode.
Verifies if selective VRF download
is active by confirming that svd roles
are "customer facing" for the line
cards that have VRF interfaces on
them.
179