Configuring Label Distribution Protocol Igp Auto-Configuration For Ospf - Cisco ASR 9000 Series Routing Configuration Manual

Implementing OSPF
Command or Action
Step 6
multi-area-interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-ospf)#
multi-area-interface Serial 0/1/0/3
Step 7
commit

Configuring Label Distribution Protocol IGP Auto-configuration for OSPF

This task explains how to configure LDP auto-configuration for an OSPF instance.
Optionally, you can configure this feature for an area of an OSPF instance.
SUMMARY STEPS
1. configure
2. router ospf process-name
3. mpls ldp auto-config
4. commit
DETAILED STEPS
Command or Action
Step 1 configure
Step 2 router ospf process-name
Example:
RP/0/RSP0/CPU0:router(config)# router
ospf 1
Step 3
mpls ldp auto-config
Example:
RP/0/RSP0/CPU0:router(config-ospf)# mpls
ldp auto-config
Step 4 commit
Configuring Label Distribution Protocol IGP Auto-configuration for OSPF
Purpose
Enables OSPF routing for the specified routing process and places
the router in router configuration mode.
Note
Enables LDP IGP interface auto-configuration for an OSPF
instance.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Purpose
Enables multiple adjacencies for different OSPF areas and
enters multi-area interface configuration mode
The process-name argument is any alphanumeric string
no longer than 40 characters.
• Optionally, this command can be configured for an area of
an OSPF instance.
479