Route-Policy - Cisco ASR 9000 Series Routing Configuration Manual

Implementing BGP
Configuring Resilient Per-CE Label Allocation Mode Using a Route-Policy
Perform this task to configure resilient per-ce label allocation mode using a route-policy.
Resilient per-CE 6PE label allocation is not supported on CRS-1 and CRS-3 routers, but supported only
Note
on CRS-X routers.
SUMMARY STEPS
1. configure
2. route-policypolicy-name
3. set label mode per-ce
4. Do one of the following:
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#
Enters global configuration mode.
Step 2
route-policypolicy-name
Example:
RP/0/RSP0/CPU0:router(config)# route-policy route1
RP/0/RSP0/CPU0:router(config-rpl)#
Creates a route policy and enters route policy configuration mode.
Step 3 set label mode per-ce
Example:
RP/0/RSP0/CPU0:router(config-rpl)# set label mode per-ce
RP/0/RSP0/CPU0:router(config-rpl)#
Configures resilient per-ce label allocation mode.
Step 4 Do one of the following:
• end
• commit
• end
• commit
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
BGP Configuration
17