Enabling Rcmd Monitoring For Is-Is Prefixes: Example; Enabling Rcmd Monitoring For Ospf Prefixes: Example - Cisco ASR 9000 Series Routing Configuration Manual

Enabling RCMD Monitoring for IS-IS Prefixes: Example

SUMMARY STEPS
1. configure
2. router ospf 100
3. track-external-routes
4. track-summary-routes
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 router ospf 100
Example:
RP/0/RSP0/CPU0:router(config)#router ospf 100
Step 3 track-external-routes
Example:
RP/0/RSP0/CPU0:router(config-ospf-af-rcmd)#track-external-routes
Step 4
track-summary-routes
Example:
RP/0/RSP0/CPU0:router(config-ospf-af-rcmd)#track-summary-routes
Step 5 commit
Enabling RCMD Monitoring for IS-IS Prefixes: Example
This example shows how to monitor RCMD prefix monitoring for individual IS-IS prefixes:
ipv6 prefix-list isis_monitor
10 permit 2001:db8::/32
!
router isis isp
address-family ipv6 unicast
monitor-convergence
prefix-list isis_monitor

Enabling RCMD Monitoring for OSPF Prefixes: Example

This example shows how to enable RCMD monitoring for individual OSPF prefixes:
ipv6 prefix-list ospf_monitor
10 permit 2001:db8::/32
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
654
Implementing RCMD
Purpose
Enables OSPF routing for the specified
routing process and places the router in
router configuration mode.
Enables tracking of external
(Type-3/5/7) LSAs prefix monitoring.
Enables tracking of summary
(inter-area) routes monitoring