Configuring Bgp Route Dampening - Cisco ASR 9000 Series Routing Configuration Manual

Configuring BGP Route Dampening

Command or Action
• redistribute isis process-id [ level { 1 | 1-inter-area | 2 }] [
metric metric-value ] [ route-policy route-policy-name ]
• redistribute ospf process-id [ match { external [ 1 | 2 ] |
internal | nssa-external [ 1 | 2 ]]} [ metric metric-value ] [
route-policy route-policy-name ]
• redistribute ospfv3 process-id [ match { external [ 1 | 2 ] |
internal | nssa-external [ 1 | 2 ]]} [ metric metric-value ] [
route-policy route-policy-name ]
• redistribute rip [ metric metric-value ] [ route-policy
route-policy-name ]
• redistribute static [ metric metric-value ] [ route-policy
route-policy-name ]
Example:
RP/0/RSP0/CPU0:router(config-bgp-af)# redistribute ospf 110
Step 5 commit
Configuring BGP Route Dampening
Perform this task to configure and monitor BGP route dampening.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
100
Implementing BGP
Purpose