Or Bundle - Cisco ASR 9000 Series Routing Configuration Manual

Enabling and Disabling IPv6 Checksum Support
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 bfd
Example:
RP/0/RSP0/CPU0:router(config)# bfd
Step 3 ipv6 checksum [disable]
Example:
RP/0/RSP0/CPU0:router(config-bfd-if)# ipv6
checksum disable
Step 4
commit
Enabling and Disabling IPv6 Checksum Calculations for BFD on an Individual Interface or
Bundle
The following procedures describe how to enable or disable IPv6 checksum calculations on an interface or
bundle .
DETAILED STEPS
SUMMARY STEPS
1. configure
2. bfd
3. interface type interface-path-id
4. ipv6 checksum [disable]
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 bfd
Example:
RP/0/RSP0/CPU0:router(config)# bfd
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
278
Purpose
Enters BFD configuration mode.
Enables IPv6 checksum support on the interface.
To disable, use the disable keyword.
Purpose
Enters BFD configuration mode.
Implementing BFD