Cisco ASR 9000 Series Routing Configuration Manual page 37

Implementing BGP
Release
Release 4.3.2
Release 5.3.1
Release 5.3.2
Release 6.0.1
•
•
•
•
•
•
•
Prerequisites for Implementing BGP
You must be in a user group associated with a task group that includes the proper task IDs. The command
reference guides include the task IDs required for each command. If you suspect user group assignment is
preventing you from using a command, contact your AAA administrator for assistance.
Prerequisites for Implementing BGP, page 7
Information About Implementing BGP, page 8
BGP Monitoring Protocol, page 78
How to Implement BGP, page 79
Configuration Examples for Implementing BGP, page 184
Where to Go Next, page 198
Additional References, page 198
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Modification
The following features were supported:
• Per-neighbor Link Bandwidth
The following features were supported:
• L3VPN iBGP-PE-CE configuration
• Source-based flow tag
• Discard extra paths
The following features were supported:
• Graceful Maintenance
• Per Neighbor TCP MSS
• BGP DMZ Aggregate Bandwidth
The following features were supported:
• Excessive Punt Flow Trap Processing
• 64-ECMP for BGP
Prerequisites for Implementing BGP
7