Configuring Isis-Nsr - Cisco ASR 9000 Series Routing Configuration Manual

Configuring ISIS-NSR

Configuring ISIS-NSR
SUMMARY STEPS
1. configure
2. router isis instance-id
3. nsr
4. commit
5. show isis nsr adjacency
6. show isis nsr status
7. show isis nsr statistics
DETAILED STEPS
Command or Action
Step 1 configure
Step 2
router isis instance-id
Example:
RP/0/RSP0/CPU0:router(config)# router isis 1
Step 3 nsr
Example:
RP/0/RSP0/CPU0:router(config-isis)# nsr
Step 4
commit
Step 5
show isis nsr adjacency
Example:
RP/0/RSP0/CPU0:router
# show isis nsr adjacency
System Id Interface SNPA State Hold Changed NSF IPv4 IPv6
R1-v1S Nii0
Step 6 show isis nsr status
Example:
RP/0/RSP0/CPU0:router
router#show isis nsr status
IS-IS test NSR(v1a) STATUS (HA Ready):
SYNC STATUS:
PEER CHG COUNT:
UP TIME:
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
370
*PtoP* Up 83 00:00:33 Yes None None
V1 Standby V2 Active V2 Standby
TRUE FALSE(0) FALSE(0)
1
00:03:12 not up
BFD BFD
0 0
not up
Implementing IS-IS
Purpose
Enables IS-IS routing for the
specified routing instance, and
places the router in router
configuration mode.
Configures the NSR feature.
Displays adjacency information.
Displays the NSR status
information.