Configuring An Eigrp Authentication Keychain - Cisco ASR 9000 Series Routing Configuration Manual

Implementing EIGRP
Command or Action
Step 11
show eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] neighbors
[ detail ] [ type interface-path-id | static ]
Example:
RP/0/RSP0/CPU0:router# show eigrp neighbors 20 detail
static
Step 12 show protocols eigrp [ vrf vrf-name ]
Example:
RP/0/RSP0/CPU0:router# show protocols eigrp
Step 13
show eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] topology
[ ip-address mask ] [ active | all-links | detail-links | pending
| summary | zero-successors ]
Example:
RP/0/RSP0/CPU0:router# show eigrp topology 10.0.0.1
253.254.255.255 summary
Step 14 show eigrp [ as-number ] [ vrf { vrf | all }] [ ipv4 ] traffic
Example:
RP/0/RSP0/CPU0:router# show eigrp traffic

Configuring an EIGRP Authentication Keychain

Perform the following tasks to configure an authentication keychain on EIGRP interfaces.
Configuring an Authentication Keychain for an IPv4/IPv6 Interface on a Default VRF
Perform this task to configure an authentication keychain for an IPv4/IPv6 interface on a default VRF.
SUMMARY STEPS
1. configure
2. router eigrp as-number
3. address-family { ipv4 | ipv6 }
4. interface type interface-path-id
5. authentication keychain keychain-name
6. commit
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Configuring an EIGRP Authentication Keychain
Purpose
Displays the neighbors discovered by EIGRP.
Displays information about the EIGRP process
configuration.
Displays entries in the EIGRP topology table.
Displays the number of EIGRP packets sent
and received.
329