Cisco ASR 9000 Series Routing Configuration Manual page 541

Implementing and Monitoring RIB
SUMMARY STEPS
1. configure
2. Use one of these commands:
3. commit
4. Use one of these commands.
DETAILED STEPS
Command or Action
Step 1
configure
Step 2 Use one of these commands:
• rcc {ipv4 | ipv6} unicast {enable | period milliseconds} Each time the scan is triggered, verification is resumed
• lcc {ipv4 | ipv6} unicast {enable | period milliseconds}
Example:
RP/0/RSP0/CPU0:router(config)#rcc ipv6 unicast enable
RP/0/RSP0/CPU0:router(config)#rcc ipv6 unicast period
500
Or
RP/0/RSP0/CPU0:router(config)#lcc ipv6 unicast enable
RP/0/RSP0/CPU0:router(config)#lcc ipv6 unicast period
500
Step 3 commit
Step 4 Use one of these commands.
• show rcc {ipv4| ipv6} unicast [summary | scan-id
scan-id-value]
• show lcc {ipv4| ipv6} unicast [summary | scan-id
scan-id-value]
• rcc {ipv4 | ipv6} unicast {enable | period milliseconds}
• lcc {ipv4 | ipv6} unicast {enable | period milliseconds}
• show rcc {ipv4| ipv6} unicast [summary | scan-id scan-id-value]
• show lcc {ipv4| ipv6} unicast [summary | scan-id scan-id-value]
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Enabling RCC and LCC Background Scan
Purpose
Triggers RCC or LCC background scan. Use the period
option to control how often the verification be triggered.
from where it was left out and one buffer's worth of
routes or labels are sent to the forwarding information
base (FIB).
Displays statistics about background scans.
• summary—Displays the current ongoing scan id
and a summary of the previous few scans.
• scan-id scan-id-value—Displays details about a
specific scan.
511