Implementing BGP
Command or Action
Example:
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#response-time
30
Or
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#response-time
off
Step 11
commit
Step 12
shutdown
Example:
RP/0/RSP0/CPU0:router(config-bgp-rpki-server)#shutdown
Configuring RPKI Prefix Validation
Perform this task to control the behavior of RPKI prefix validation processing.
•
SUMMARY STEPS
1. configure
2. router bgp as-number
3. Use one of these commands.
4. bgp origin-as validation signal ibgp
5. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)#router bgp
100
• bgp origin-as validation disable
• bgp origin-as validation time {off | prefix_validation_time
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
BGP Prefix Origin Validation Based on RPKI
Purpose
Configure the off option to wait indefinitely for
a response.
(Optional)
Configures shut down of the RPKI cache.
Purpose
Specifies the BGP AS number and enters the BGP configuration mode,
allowing you to configure the BGP routing process.
69