Disabling Selective Vrf Download - Cisco ASR 9000 Series Configuration Manual

Disabling Selective VRF Download

Disabling Selective VRF Download
Selective VRF Download is disabled by default. However, if the SVD is enabled, perform these tasks to
disable the functionality.
SUMMARY STEPS
1. admin
2. configure
3. no svd platform enable
4. commit
5. show svd state
6. admin
7. reload location all
8. exit
9. show svd role
DETAILED STEPS
Command or Action
Step 1 admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 2
configure
Example:
RP/0/RSP0/CPU0:router(admin)#configure
Step 3 no svd platform enable
Example:
RP/0/RSP0/CPU0:PE51_ASR-9010(admin-config)#no svd platform enable
Step 4
commit
Step 5 show svd state
Example:
RP/0/RSP0/CPU0:router#show svd state
Selective VRF Download (SVD) Feature State:
SVD Configuration State
SVD Operational State
Step 6 admin
Example:
RP/0/RSP0/CPU0:router#admin
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
154
Unsupported
Unsupported
Implementing BGP
Purpose
Enters administration EXEC mode.
Enters Administrative configuration
mode.
Disables Selective VRF Download.
Displays Selective VRF download
feature state information.
Enters administrator mode.
OL-30423-03