Call Forward Settings Section; Selective Call Forward Settings Section - Cisco WRP500 Administration Manual

User page
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
•
When a call is made from Line 1 or Line 2, the WRP500 uses the user and line settings for that line; there
is no user login support. Per user parameter tags must be appended with [1] or [2] (corresponding to line
1 or 2) in the configuration profile. It is omitted below for readability.
Voice tab > User page >

Call Forward Settings section

Cfwd All Dest
Cfwd Busy Dest
Cfwd No Ans Dest
Cfwd No Ans Delay
Voice tab > User page >

Selective Call Forward Settings section

Cfwd Sel1- 8 Caller
Cfwd Sel1 - 8 Dest
Block Last Caller
Cisco WRP500 Administration Guide
A-42
"Ring Settings section" section on page A-45
Forward number for Call Forward All Service
The default is blank.
Forward number for Call Forward Busy Service. Same as Cfwd All
Dest.
The default is blank.
Forward number for Call Forward No Answer Service. Same as
Cfwd All Dest.
The default is blank.
Delay in sec before Call Forward No Answer triggers. Same as
Cfwd All Dest.
The default is 20.
Caller number pattern to trigger Call Forward Selective 1, 2, 3, 4, 5,
6, 7, or 8.
The default is blank.
Forward number for Call Forward Selective 1, 2, 3, 4, 5, 6, 7, or 8.
Same as Cfwd All Dest.
The default is blank.
ID of caller blocked via the Block Last Caller service.
The default is blank.
Appendix A Advanced Voice Fields