Cylinder Gauges; Pipeline Gauges - Dräger Narkomed 2B Service Manual

NM2B
( ) 6.11.2

Cylinder Gauges

6.11.2.1
6.11.2.2
6.11.2.3
6.11.2.4
6.11.2.5
6.11.2.6
( ) 6.11.3

Pipeline Gauges

6.11.3.1
6.11.3.2
6.11.3.3
6.11.3.4
6.11.3.5
6.11.3.6
6.11.3.7
Rev. Y
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
Are the pressure gauges correct for the gases indicated by the
flowmeters? ___ (Y)
Is the gauge closest to the table top for cylinder supply pressure?
___ (Y)
Bleed all pressure from the cylinder circuit.
Are the cylinder gauges at zero (0) PSI? ___ (Y)
Open the cylinder valves.
Do the cylinder pressure gauges respond properly? ___ (Y)
Are the gauges right below the flowmeters for pipeline supply
pressure? ___ (Y)
Are the pipeline pressure gauges at zero (0) PSI? ___ (Y)
Connect the pipeline supply.
Do the pipeline pressure gauges respond properly? ___ (Y)
Are the correct gas identification labels affixed at each of the
pipeline inlets? ___ (Y)
Does the back panel identify each of the pipeline inlets properly?
___ (Y)
Disconnect the pipeline hoses.
6-25
RETURN TO CD-ROM TABLE OF CONTENTS
PMC PROCEDURE (continued)