NM2B
4.26.11 Connect the cables that were previously removed from J7 and J1 on
4.26.12 Place the monitor box top shelf into position, connect its ground wire
4.26.13 Reset the circuit breakers at the back of the monitor box.
4.26.14 Perform the PMS Procedure given in Section 6.
Rev. A
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
REPLACEMENT PROCEDURES (continued)
the power supply assembly.
to the chassis ground tab, and reinstall the top shelf screws.
4-91
RETURN TO CD-ROM TABLE OF CONTENTS