Revision History - YASKAWA CIMR-F7A Instruction Manual

Revision History

The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
MANUAL NO. TOE-S616-55.1
C Printed in Japan April 2001 00-12
Rev.
Date of Printing
No.
−
December 2000
April 2001
1
May 2001
2
April 2002
3
August 2002
4
March 2003
5
August 2003
6
September 2004
7
January 2005
8
1
Revision number
Date of Date of original
printing publication
Section
−
First edition
Chapter 4 Addition: Precautions before Using Autotuning etc.
Chapter 6 Revision: Description of carrier frequency and inverter overload current level
Addition: Index
Chapter 10 Revision: Conformance to CE markings
Addition: Setting the power supply voltage jumper
7-8 and 9-4 page Revision: Description about detection level of over voltage and under voltage
Back cover Revision: Address
Revision: NEMA1 → NEMA1 (Type1)
Chapter 4 Addition: LCD brightness adjustment (o1-05)
Chapter 6 Addition: Using Frequency Detection
Chapter 4 Revision: Autotuning
Addition: Information on Inverters with SPEC: E or later.
Chapter 3 Addition: DATA/ENTER Key is invalid when UV is detected.
Chapter 7 Revision: Note about GF in Table 7.1 Fault Displays and Processing.
Addition: Note about OC and GF in the Meaning column in Table 7.1 Fault Displays and Process-
Revised Content
Table 3.2 Relation of Inverter to RUN and STOP Indicators
ing.