Conformance To Ce Markings; Ce Markings; Requirements For Conformance To Ce Markings - YASKAWA CIMR-F7A Instruction Manual

Conformance to CE Markings

Points regarding conformance to CE markings are given below.

CE Markings

CE markings indicate conformance to safety and environmental standards that apply to business transactions
(including production, imports, and sales) in Europe. There are unified European standards for mechanical
products (Machine Directive), electrical products (Low Voltage Directive), and electrical noise (EMC Direc-
tive). CE markings are required for business transactions in Europe (including production, imports, and sales).
The Varispeed F7-Series Inverters bear CE markings indicating conformance to the Low Voltage Directive
and the EMC Directive.
Low Voltage Directive: 73/23/EEC
•
EMC Directive:
•
Machinery and installations that incorporate the Inverter are also subject to CE markings. It is ultimately the
responsibility of customers making products incorporating the Inverter to attach CE markings to the finished
products. The customer must confirm that the finished products (machines or installations) conform to the
European Standards.

Requirements for Conformance to CE Markings

Low Voltage Directive
Varispeed F7-Series Inverters satisfy testing for conformance to the Low Voltage Directive under the condi-
tions described in European Standard EN50178.
Requirements for Conformance to the Low Voltage Directive
Varispeed F7-Series Inverters must satisfy the following conditions in order to conform to the Low Voltage
Directive.
It must be used under conditions corresponding to overvoltage category 3 or less and pollution degree 2 or
•
less as specified in IEC664.
Input fuses:
•
For details on selecting fuses, refer to Table 10.4 Selection Requirements for Input Fuses with Examples.
With Inverters CIMR-F7A2022 to 2110 and CIMR-F7A4022 to 4300, an enclosure preventing foreign
•
matter from entering from the top or front sides is required (IP4X or higher: panel installation).
93/68/EEC
89/336/EEC
92/31/EEC
93/68/EEC

Conformance to CE Markings

10
13
10-