YASKAWA CIMR-F7A Instruction Manual page 7

• Provide a separate holding brake if necessary.
• If using an Inverter with an elevator, take safety measures on the elevator to prevent the elevator
• A CMOS IC is used in the control board. Handle the control board and CMOS IC carefully.
• Do not change the wiring, or remove connectors or the Digital Operator, during operation.
Other
• Do not attempt to modify or alter the Inverter.
• Do not subject the Inverter to halogen gases, such as fluorine, chlorine, bromine, and iodine, at any
vi
Always make any adjustments other than those involving the operation of the Inverter with the holding brake released.
Failure to observe this caution may result in injury.
from dropping.
Failure to observe this caution can result in injury.
The CMOS IC can be destroyed by static electricity if touched directly.
Doing so can result in personal injury.
Doing so can result in electrical shock or injury.
time even during transportation or installation.
Otherwise, the Inverter can be damaged or interior parts burnt.
WARNING
CAUTION
WARNING
CAUTION