Drive Mode - YASKAWA CIMR-F7A Instruction Manual

Drive Mode

Drive mode is the mode in which the Inverter can be operated. The following monitor displays are possible in
drive mode: The frequency reference, output frequency, output current, and output voltage, as well as fault
information and the fault history.
When b1-01 (Reference selection) is set to 0, the frequency can be changed from the frequency setting display.
Use the Increment, Decrement, and Shift/RESET Keys to change the frequency. The user constant will be
written and the monitor display will be returned to when the DATA/ENTER Key is pressed after changing the
setting.
Example Operations
Key operations in drive mode are shown in the following figure.
Mode Selection Display
MENU
Drive Mode
DRIVE QUICK
The display for the first monitor constant (frequency reference) will be displayed when power is turned ON.
The monitor item displayed at startup can be set in o1-02 (Monitor Selection after Power Up).
Operation cannot be started from the mode selection display.
IMPORTANT
Monitor Constant Display
Power ON
Frequency reference
DATA
ENTER
ESC
ADV VERIFYA.TUNE
Output frequency
ESC
Output current
ESC
Monitor setting for o1-01
ESC
Status Monitor
RESET
ESC
DATA
ENTER
Error Trace
RESET
ESC
Fault History
RESET
ESC
DRIVE QUICK ADV VERIFYA.TUNE
Fig 3.4 Operations in Drive Mode
Detailed Monitor Constant Monitor Display
Display
Frequency reference setting/
display unit o1-03
DATA
ENTER
ESC
DATA
Frequency reference
ENTER
ESC
DATA
Fan operating time
ENTER
ESC
ESC
Current error
ESC
DATA
Operating time at error
ENTER
ESC
ESC
DATA
1st previous error
ENTER
ESC
ESC
Operating time at 4th
DATA
previous error
ENTER
ESC
ESC
DRIVE QUICK ADV VERIFYA.TUNE
Modes
7
3-