Snmp Hardware Reporting - Oracle Netra Server X5-2 Installation Manual

• SER MGT—For console access for administrative and maintenance purposes
• MGMT0—For EMS control, RADIUS accounting, CLI management, SNMP queries
and traps, and other network management functions
• MGMT1 and MGMT2—For High Availability (HA), or for network management with
no HA configuration
• USB—For a storage device, or for installing software
• P0 - P3—For signaling and media traffic on copper or fiber optic cable
When performing the phy-interface configuration, refer to the following table for
mapping each NIU label and operation-type to the appropriate slot and port
parameters.
NIU Label
Mgmt 0
Mgmt 1
Mgmt 2
P0
P1
P2
P3
Hardware Support
The Acme Packet 3900 hardware provides the following:
• 1 management interface at 1Gbps
• 4 media and signalling interfaces at 10/100/1000Mbs
• 1 HA interface at 10/100/1000Mbs
• 4 USB ports
• Hardware transcoding support for up to 5 Digital Signal Processor (DSP) modules
• 1 quad-span Time Division Multiplexing (TDM) PCIe card

SNMP Hardware Reporting

The Acme Packet 3900 platform relies on a specific set of MIB objects, in addition to
the standard MIB objects.
The Acme Packet 3900 platform supports MIB objects for power supplies, fans,
temperature sensors, system information, transcoding DSP(s), wancom ports, media
ports, and the product OID. The Standard MIBs (such as MIB-2 objects) are
supported.
The Acme Packet 3900 monitors the following environmental parameters by way of
SNMP:
Updates to sysObjectID OID in the ap-products.mib.
• Updates the apNetNet 3000Series object to include the apNetNet 3900 object.
Updates to the entity OID in ap-entity-vendortype.mib.
Operation-type Slot
Maintenance 0
Maintenance 0
Maintenance 0
Media 0
Media 0
Media 1
Media 1
Appendix A
Acme Packet 3900 Physical Interfaces
Port
0
1
2
0
1
0
1
A-4