Debug Mode; Parameter List; Parameters Value Types - Teltonika FM1100 User Manual

Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum
Records to Send: 1. GPRS Enabled: 1. Time Sync: 1.

7 Debug mode

FM1100 is able to transmit its current state when connected to PC using USB
cable. It is used to detect errors and provide information to possible solutions
when operating
http://avl1.teltonika.lt/Downloads/Software/Terminal.zip.
After launching terminal choose baud rate 115200 and hardware control –
none. Select COM port which is assigned to "Virtual COM Port". Click on 'Start
Log' button and save a new file. Then click 'Connect' to start receiving messages
from FM1100.

8 Parameter List

8.1 Parameters value types

S8 – Signed Char
S8[n] – String of n Char
U8 – Unsigned Char
U16 – Unsigned Short
S32 – Signed Integer
U32 – Unsigned Integer
U64 – Unsigned Long Long Integer
the device, 0 – not synchronized; 1 –
synchronized
as unexpected.
Figure 35. Terminal window
Download Terminal from:
47