Table of Contents
Advertisement
6.2
profile. They are common for all profiles.
on event' is disabled – FM4200 switches profiles depending on GSM operator code method.
Otherwise it switches profiles depending on I/O events (see chapter 5 for more details
about profile switching).
trigger defines input, which will be used to receive or make a call. Usually to that input a
button is connected.
newest records or starting from oldest record.
affects precision– values measured up to 4g are more precise than 12g (higher resolution).
cases are: all inputs 0-30V, 0-10V, two inputs 0-10V while other two 0-30V. maximum input
range has impact on precision – values on 0-10V input are measured more precisely than 0-
30V (higher resolution).
to the server before disconnecting after successful data transfer. Note that even if it
disconnects from server, it always keep active GPRS session.
Downloaded from
www.Manualslib.com
Global parameter settings
Global parameters are parameters of the module that do not depend on selected
19 Figure Global parameters window
'Profile settings' – allow you to select profile switching method. When 'Profile change
'Voice settings' – allows to setup microphone sensitivity and speaker loudness level.
'Call Settings' – allows to enter one number to which FM4 will be able to call to. Call
'Record Settings' – used to switch between two data sending modes: starting from
'Accelerometer settings' – defines accelerometer sensitivity range: 0..4g or 0..12g. This
'Analog input settings' – defines maximum input voltage on analog input. Possible
'Record refresh setting' – defines how many seconds should FM4200 keep connection
manuals search engine
25
Advertisement
Table of Contents
