Table of Contents
Advertisement
4 FIRMWARE
4.1 Updating firmware using USB cable
FM6300 functionality is always improving, new firmware versions are developed. Current
module firmware version can be retrieved from configurator. See configuration description for
details. Contact sales manager to get the latest firmware.
Connect FM6300 to PC with the USB cable. Launch "Firmware Updater", select COM port
to which device is connected, click connect, and when IMEI and Firmware version fields are filled,
start the update. Device needs some time to send IMEI and Firmware version, so do not be afraid
if IMEI will not show up immediately, disconnect and after 1-2 minutes try to connect again.
When starting update device will open link with updater. With link open device downloads
firmware and starts installing. Wait until updater becomes green and it gives message that
firmware is done. Update process may take up to several minutes.
Figure 18 FM updater screen
26
Advertisement
Table of Contents
