Firmware Update
Installation
Firmware update is performed using Track Assistant software.
First of all switch GH3000 to Firmware installation mode. To do this follow these steps :
a) Press and hold 1 (green) and 5 (red Alarm) buttons and shortly press reset button (please use
paperclip for this). Make sure GH3000 is in Firmware update mode. Battery's (1) and GSM's (2)
LED s should light up green.
b) Turn off GH3000. Press and hold 1 (green) and 5 (red Alarm) buttons and now connect GH3000
to computer via USB cable. Make sure GH3000 is in Firmware update mode. Battery's (1) and
GSM's (2) LED s should light up green.
3. Indication
3. Indication
107