Firmware; Updating Firmware Using Usb Cable - Teltonika FM1010 User Manual

4 FIRMWARE

4.1

Updating firmware using USB cable

FM1010 functionality is always improving, new firmware versions are developed. Current
module firmware version can be retrieved from Configurator. See configuration description for
details.
Contact sales manager to get the latest firmware.
Device must be powered on. Connect FM1010 to PC with the USB cable. Launch "Firmware
Updater", select COM port to which device is connected, click connect, and when IMEI and
Firmware version fields are filled, start the update. Device needs some time to send IMEI and
Firmware version, so do not be afraid if IMEI will not show up immediately, disconnect and after
1-2 minutes try to connect again. Update process may take up to several minutes.
To avoid possible battery malfunctions starting from firmware version 00.03.22 internal
battery completely disconnects from when temperature reaches approx. 60 C degrees.
We strongly recommended to keep firmware version up to date (00.03.22 or newer).
Figure 8 FM1010 firmware updater screen
17