Firmware; Updating Firmware Using Usb Cable - Teltonika FM1200 User Manual

4 FIRMWARE

4.1 Updating firmware using USB cable

FM1200 functionality is always improving, new firmware versions are developed.
Current module firmware version can be retrieved from Configurator. See configuration
description for details.
Contact sales manager to get the latest firmware.
Updater is needed to update the firmware. It can be downloaded from:
http://avl1.teltonika.lt/downloads/FM12/
Firmware must to be copied to "Firmware updater" folder. Only one firmware must
be in folder.
Connect FM1200 to PC with the USB cable. Launch "Firmware Updater", select
COM port to which device is connected, click connect, and when IMEI and Firmware
version fields are filled, start the update. Device needs some time to send IMEI and
Firmware version, so do not be afraid if IMEI will not show up immediately, disconnect
and after 1-2 minutes try to connect again. Update process may take up to several
minutes.
Figure 14. FM1200 firmware updater screen
19