Setting The Printer Output Conditions - YOKOGAWA SMARTDAC+ GX10 User Manual

1.19 Configuring System Settings (Time zone, display language, status relay, etc.)
1.19.7

Setting the Printer Output Conditions

Path
1-174
GX/GP: MENU key > Browse tab > Setting > Setting menu System settings > Printer
settings
Web application: Config. tab > System settings > Printer settings
Hardware configurator: System settings > Printer settings
Description
Setup Item
IP Address
Paper size
Page orientation
Resolution (dpi)
Number of copies
Snapshot
1
Paper size indicator
1 Appears when Snapshot is set to On.
IP address
Set the IP address of the printer.
Paper size
Set the size of the paper to print.
Page orientation
Set the print orientation.
Resolution (dpi)
Set the print resolution.
Number of copies
Set the number of copies to print.
Snapshot
Set this to On to print a snapshot.
Paper size indicator (Release number 2 and later)
Set this to On to fit (expand) snapshots to the paper size for printing. If set to Off, snapshots
are printed at their original size.
Note
If an SD memory card is not inserted, snapshot printing and report printing using report templates
are not possible.
Compatible printers
Printers supporting the HP PCL5c language and can print through port 9100 on a LAN connection
Selectable Range or Options
0.0.0.0 to 255.255.255.255
A4, A3, Letter
Vertical, Horizontal
300dpi, 600dpi
1 to 10
Off, On
Off, On
Default Value
0.0.0.0
A4
Vertical
300dpi
1
Off
Off
IM 04L51B01-01EN