Notification Screen Display - YOKOGAWA SMARTDAC+ GX10 User Manual

1.28.2

Notification Screen Display

IM 04L51B01-01EN
1.28 Using the Aerospace Heat Treatment (/AH option) (Release number 3 and later)
Notification contents
Setup Item
Title
Notification message 1
Notification message 2
Buzzer
Title
Set the title to show on the notification screen.
Notification message 1, 2
Set the notification contents.
Buzzer
Set this to On to sound the buzzer.
Due date setting display
Setup Item
Calibration correction settings
Calibration correction settings
Set this to On to show the calibration correction settings of AI channels in the due date
setting of the notification screen.
When a daily reminder date arrives, a notification screen appears at 00:00 (HH:MM).
This screen reappears at the re-notification cycle.
If the buzzer is enabled, a buzzer is sounded when the notification screen appears.
Notification screen
Contents displayed the notification screen
• Tap Due date setting to switch to the due date setting screen where you can reset the due
date and perform calibration correction (based on settings).
For details on Due date setting, see page 1-224 in section 1.28.3, "Resetting the
Calibration Reminder Due Date, Performing Calibration Correction".
• If another notification screen appears when a notification screen is already displayed, the
one with the closer due date is prioritized.
For notifications other than the prioritized one, only their schedule numbers are displayed
in the form (Other notification: *,*,*).
Selectable Range or Options
Character string (up to 32 characters,
Character string (up to 32 characters,
Character string (up to 32 characters,
Off, On
Selectable Range or Options
Off, On
Title
Notification content 1
Notification content 2
Last setting date
Due date
Due date setting
Other notification numbers
Default Value
—
A a # 1
)
—
A a # 1
)
—
A a # 1
)
Off
Default Value
Off
1-223
1
2
3
4
5
App
Index