Index - YOKOGAWA SMARTDAC+ GX10 User Manual

1.27 Using the DARWIN Compatible Communication Function (Release number 2 and later)
Configure the DARWIN compatible
IM 04L51B01-01EN
Communication Ports and Maximum Number of Connections (When
Ethernet)
Port Number Maximum Number of
Connections
34150 1
34151 4
• There are no limitations on commands on either port. All supported commands work on
both ports.
• Port 34159 (communication status verification) cannot be used.
Terminator
Classification
Input
Output
Procedure to Use the GX/GP
Configure the system
Execute reconfiguration
Configure functions
Configure communication settings
communication function
Preparation complete
Notes
RS232C command support, configuration port
Loading instantaneous data
Terminator
CR+LF or LF
CR+LF
Align the GX/GP configuration to DARWIN.
• Connect expandable I/Os.
• Install modules.
Make the GX/GP recognize the modules.
For the setting procedure, see section 1.24.2,
"Reconfiguring the GX/GP."
As necessary, configure the GX/GP functions
according to DARWIN.
For setting procedure, see section 1.
Ethernet: Set the GX/GP IP address, subnet mask, and the like.
For the setting procedure, see section 1.16.1, "Setting
Basic Communication Conditions."
Serial communication : Set the GX/GP address, receiver function,
1
and the like.
For the setting procedure, see section 1.17.1, "Setting
Basic Communication Conditions."
For the setting procedure (Ethernet), see "DARWIN" in section
1.16.9, "Setting the Server Functions to Use (FTP, HTTP, SNTP,
MODBUS, GENE, DARWIN)."
For the setting procedure (Serial communication
1.17.1, "Setting Basic Communication Conditions."
1 Release number 2 (version 2.02) and later
1
2
3
4
5
App

Index

), see "DARWIN" in
1
1-217