Loading And Deleting Trusted Certificates (Release Number 2 And Later) - YOKOGAWA SMARTDAC+ GX10 User Manual

1.21 Loading Settings
1.21.5 Loading and Deleting Trusted Certificates (Release number 2 and later)
Path
Description
Procedure
Path
Description
1-192
To use this function, you must set Encryption function to On under Encryption/Certificate
of Init/Calib.
Loading a Certificate
GX/GP: MENU key > Browse tab > Save load > Menu Load settings > Trusted
Certificate > Load trusted certificate
Setup Item
Media type
Select file
1 See section 1.20.1, "Loading Setting Parameters."
Certificate Information
Setup Item
Issuer
Subject
Valid not before
Validity not after
Front half of hash value (SHA1)
Latter half of hash value (SHA1)
Issuer, Subject, Valid Not Before, Valid Not Before, Front Half of Hash Value
(SHA1), Latter Half of Hash Value (SHA1)
The items in the file to be loaded are displayed.
For details, see page 1-213 in section 1.26.4, "Viewing Certificate Details and Removing
Certificates".
1
Tap Media type to select the medium.
2
Tap Select file to set the file to be loaded.
Certificate Information shows the items in the certificate.
3
Tap Execute.
The certificate is loaded.
4
Tap Exit.
The GX/GP returns to the original screen.
Operation complete
Deleting a Certificate
GX/GP: MENU key > Browse tab > Save load > Menu Load settings > Trusted
Certificate > Deleting trusted certificate
Setup Item
Select file
Select File
Set the file you want to delete.
Selectable Range or Options
SD, USB
—
Selectable Range or Options
—
—
—
—
—
—
Selectable Range or Options
—
Default Value
1
—
Default Value
—
—
—
—
—
—
Default Value
—
IM 04L51B01-01EN