Using The Batch Function - YOKOGAWA SMARTDAC+ GX10 User Manual

2.1 Starting and Stopping Recording and Computation
2.1.2

Using the Batch Function

Procedure
2-4
Setting the Batch Name (Batch name-No. Lot No.) and Comments
1
Press MENU.
The menu screen appears.
2
Tap the Universal tab and then Batch.
A screen for setting the batch name and comments appears.
3
Tap Batch name-No., and set the batch number. (Up to 32 characters)
If you are using lot numbers, set the lot number.
4
Tap Comment 1, Comment 2, or Comment 3, and enter the comment. (Up to 50
characters)
5
Tap Exit.
The batch screen closes.
Operation complete
Note
• Batch numbers and lot numbers cannot be changed after the GX/GP starts recording.
• You can change the comments as many times as you wish before the GX/GP starts recording.
The last specified comment is valid.After the GX/GP starts recording, you can only set
comments in empty comment boxes. However, comments that you have confirmed cannot be
changed.
• The comments are cleared when the GX/GP stops recording.
• The text fields that you set before you start recording (see "Starting Recording (Record start)"
on the next page) are cleared when the GX/GP stops recording.
• The batch number, lot number, and comments are saved to the display data file or event data
file. They are not saved to the setting parameter file.
Displaying the Text Field Settings
1
Press MENU.
The menu screen appears.
2
Tap the Universal tab and then Text field.
The batch text field settings appear.
You can drag or flick to scroll through the batch text field.
3
Tap Exit.
The screen closes.
Operation complete
Displays approximately 12 text fields
Scroll
Scroll
IM 04L51B01-01EN