Displaying The Statuses Of All Channels On One Screen (Overview Display) - YOKOGAWA SMARTDAC+ GX10 User Manual

2.2.3 Displaying the Statuses of All Channels on One Screen (Overview
Display)
Procedure
IM 04L51B01-01EN
This section explains how to use the overview display.
Displaying the Overview
1
Press MENU.
The menu screen appears.
2
Tap the Browse tab and then Overview.
The overview is displayed.
All channel overview display
Operation complete
Note
If the number of used channels (the total of IO channels, math channels, and communication
channels) exceeds the maximum number of the overview display (30 for the GX10/GP10 and 100
for the GX20/GP20), all channel display is not possible.
Displaying the Channel Overview and Group Overview
1
Press MENU.
The menu screen appears.
2
Tap the Context tab and then Display Grouping/All channel.
Either the overview at the channel level or the overview at the group level is displayed.
Each time you tap Display Grouping/All channel, the setting toggles between displaying
at the channel level and group level.
3
Tap the Close icon to close the menu screen.
Operation complete
2.2 Configuration of Measured Data Display
Channel number, tag, or tag No.
Measured value and unit
Channels on which alarms are
occurring are displayed in red.
Switch between groups and all channels
1
2
3
4
5
App
Index
2-17