Setting Alarms - YOKOGAWA SMARTDAC+ GX10 User Manual

1.16 Configuring Communication Channels (/MC option)
1.16.2

Setting Alarms

Path
Description
1-138
GX/GP: MENU key > Browse tab > Setting > Setting menu Communication channel
settings > Alarm
Web application: Config. tab > Communication channel settings > Channel range
(display example: C001-C020) > Alarm
Hardware configurator: Setting tab > Communication channel settings > Channel range
(display example: C001-C020) > Alarm
Setup Item
First-CH
Last-CH
First-CH, Last-CH
Set the target channels.
Level 1, Level 2, Level 3, Level 4
Setup Item Selectable Range or Options
On/Off Off, On
1
Type H: High limit, L: Low limit, T: Delay high limit, t: Delay low limit
1
Value –9999999 to 99999999
1, 3
Hysteresis Numeric value (0 to 100000)
1
Logging On/Off
1
Output type Off, Relay, Internal switch
2
Output No. DO channel or internal switch
1 Appears when a level (1 to 4) is set to On.
2 Appears when Output type is not set to Off.
3 Appears when the type is set to H: High limit or L: Low limit.
On/Off
Set this to On to set alarms.
Type
Set the alarm type.
Value
Set the alarm value for the specified alarm type.
Options Value
H, L Within –9999999 to
99999999 excluding the decimal point.
T, t Same as H and L
Hysteresis
Set this to establish an offset between the value used to activate and release alarms.
Logging
Set this On to display an alarm (notify you) when an alarm occurs. If set to Off, when an
alarm occurs, the GX/GP outputs signals to alarm output DO channels or internal switches
but does not display the alarm. Alarms are also not recorded in the alarm summary.
Output type
Set the alarm output destination.
Output No.
Set the number of the DO channel or internal switch to output alarms to.
Selectable Range or Options
GX20-1/GP20-1: C001 to C300
GX20-2/GP20-2: C001 to C500
GX10/GP10: C001 to C050
Same as the first channel
Default Value
C001
C001
Default Value
Off
H: High limit
0
0
On
Off
—
IM 04L51B01-01EN