Configuring The Serial Communication Function (/C2 And /C3 Options); Setting Basic Communication Conditions - YOKOGAWA SMARTDAC+ GX10 User Manual

1.18 Configuring the Serial Communication Function
(/C2 and /C3 options)
1.18.1

Setting Basic Communication Conditions

Path
Description
IM 04L51B01-01EN
Set serial communication parameters.
GX/GP: MENU key > Browse tab > Setting > Communication (Serial) settings > Basic
settings
Web application: Config. tab > Communication (Serial) settings > Serial basic settings
Hardware configurator: Communication (Serial) settings > Serial basic settings
Receiver
Setup Item
Function
Address
1 Release number 2 and later.
2 Release number 2 (version 2.02) and later
Function
Set the function to use. To use general purpose communication, select Normal.
To execute communication commands with a barcode reader, select Bar-code. A portion of
the control and output communication commands can be executed.
The commands that can be executed are the same as those of the USB keyboard. For
details, see page 1-177 in section 1.19.11, "Setting USB Input Devices (/UH option)".
Address
Set the GX/GP address.
Function
Normal/DARWIN
Modbus master, Modbus slave 1 to 247
Data transfer
Setup Item
Baud rate
Parity bit
Stop bit
Data length
1
Handshake
1 Does not appear for RS-422/485 (/C3 option)
Baud rate
Set the baud rate.
Parity bit
Set the parity check method.
Stop bit
Set the stop bits.
Data length
Set the data length. To output the data in binary format, select 8bit.
Handshake
Set the handshaking method.
Selectable Range or Options
Off, Normal, Modbus master (/MC option),
1
Modbus slave, Bar-code , DARWIN
When the function is Normal or DARWIN: 1
to 99
Other than Normal or DARWIN: 1 to 247
Selectable Range or Options
1 to 99
Selectable Range or Options
1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200 (bps)
None, Even, Odd
1bit, 2bit
7bit, 8bit
Off:Off, XON:XON, XON:RS, CS:RS
Default Value
Normal
2
1
Default Value
9600
Even
1bit
8bit
Off:Off
1-161
1
2
3
4
5
App
Index