Writing Registered Messages And Free Messages - YOKOGAWA SMARTDAC+ GX10 User Manual

2.2 Configuration of Measured Data Display
2.2.5

Writing Registered Messages and Free Messages

Procedure
2-20
Changing the Displayed Content of an Area of the Multi Panel
1
Tap the display area you want to change.
The multi panel edit screen appears.
2
Tap the display icon that you want to change to. To change the group, tap the display
group switch icons.
The specified display appears.
3
Tap the Close icon.
The multi panel edit screen closes.
Operation complete
Registering the Multi Panel That You Changed
1
Press MENU.
The menu screen appears.
2
Tap the Context tab and then Multi panel setting.
The multi panel setting screen appears.
3
Set the multi panel name, and tap OK.
The multi panel is registered.
Operation complete
You can recall preset messages and write them. You can also create messages and write
them (free messages).
Writing a Registered Message
1
Display the group that you want to write a message to.
• If a display unrelated to a group such as the overview display is shown, messages
are written to all groups even when Write group is set to Separate. In multi panel,
messages are written to the displayed groups.
• Messages are written to all groups when Write group is set to Common.
2
Press MENU.
The menu screen appears.
3
Tap the Universal tab and then Message.
A message list appears.
If Trend rate switching (Second interval) is set to On and you specify the message input position
by moving the scale image or by scrolling the waveform, a screen for switching to the historical
trend screen will appear. Tap a data type to switch to the historical trend.
In trend display, Message also appears on the Context tab.
4
Select the message field to write, and tap OK.
The message is written.
If the historical trend is displayed, press MENU, select the Context tab, and tap Exit to return to
the original screen.
Operation complete
IM 04L51B01-01EN