Setting Display Groups - YOKOGAWA SMARTDAC+ GX10 User Manual

1.7 Setting Display Conditions
Explanation
1.7.2

Setting Display Groups

Path
Description
1-82
If the recording mode is set to Event and trend rate switching (Second interval) is set to Off,
the trend interval depends on the recording interval of event data. If trend rate switching
(Second interval) is set to On, you can specify any trend interval you want. However, the
minimum trend interval that you can set depends on the scan interval.
Recording Interval of Event Data and Trend Interval
Recording interval
Trend interval [/div]
Recording interval
Trend interval [/div]
Recording interval
Trend interval [/div]
Assign channels and set the group name for each display group. Set lines at specified
positions in the waveform display range on the Trend display. Set to display a scale with a
scale image.
If the multi-batch function (/BT option) is enabled, see the multi-batch function manual (IM
04L51B01-03EN).
GX/GP: MENU key > Browse tab > Setting > Setting menu Display settings > Group
settings
Web application: Config. tab > Display settings > Group settings > Group No. (display
example: 1-20)
Hardware configurator: Display settings > Group settings > Group No. (display
example: 1-20)
Setup Item
Group number
Group number
Select the target group number.
Group settings
Setup Item
On/Off
Group name
Channel set
On/Off
Set this to On to use the target group number.
Group name
Set the group name.
Channel set
Select from AI channels, DI channels, DO channels, math channels (/MT option), and
communication channels (/MC option).
100ms 200ms 500ms
5s 10s 15s
15s 20s 30s
450s 10min 15min
15min 20min 30min
450min 10h 15h
Selectable Range or Options
GX20-1/GP20-1: 1 to 50
GX20-2/GP20-2: 1 to 60
GX10/GP10: 1 to 30
Selectable Range or Options
Off, On
Character string (up to 16 characters,
GX20/GP20: Up to 20
GX10/GP10: Up to 10
1s 2s 5s
30s 1min 150s
1min 2min 5min
30min 1h 150min
Default Value
1
Default Value
Off
—
A a # 1
)
—
10s
5min
10min
5h
IM 04L51B01-01EN