Other Settings - YOKOGAWA SMARTDAC+ GX10 User Manual

1.15 Configuring the Event Action Function
1-134
Example 3: Saving the Data Every Day at Hour 17
Save recorded data to the SD memory card every day at hour 17. Use event action number
3. Use match time timer number 1.
Setting Match Time Timer 1
• Setup Screen
GX/GP: MENU key > Browse tab > Setting > Setting menu Timer settings > Match time
timer 1
• Setup Items
Setup Item
Kind
Timer match condition
Timer action
Configuring the Event Action
• Setup Screen
MENU key > Browse tab > Setting > Setting menu Display settings > Event action
• Setup Items
Setup Item
Event action number
Event action
Event
Action

Other Settings

Set the display data to be saved automatically. Set the file save interval to 1day or longer.
If a file save interval shorter than 1day is specified, the data is also saved at the file save
interval.
Setup: See page 1-94 in section 1.9.1, "Setting the Type of Data to Record (Display or
event data) and Recording Conditions".
Setup: See page 1-107 in section 1.10.2, "Setting the Save Method to Media (Auto save or
manual save) and Media FIFO".
Example 4: S etting DO to OFF and When Recording Starts and DO to ON
When Recording Stops
Set the output status of DO channel 0009 to ON when recording stops and OFF when
recording starts.
Recording start
Event
Action
This example assumes that a DI/DO module is installed in slot 0 of the GX/GP main unit.
Use event action numbers 4 and 5.
Value
Kind Day
Hour 17
Minute 00
Timer action Repeat
Value
3
On/Off On
Type Match time timer
No. 1
Operation mode Edge
Type Save display data
Recording stop
Recording start
Recording stop
DO[0009]: On
DO[0009]: Off
IM 04L51B01-01EN