Transmitting E-Mail Messages; Configuring The Smtp Client Function; Setting The Mail Content - YOKOGAWA SMARTDAC+ GX10 User Manual

3.2 Transmitting E-mail Messages
3.2.1

Configuring the SMTP Client Function

Description
3.2.2

Setting the Mail Content

Description
IM 04L51B01-01EN
This section explains how to configure e-mail transmission settings.
The SMTP client function is used to send E-mail from the GX/GP.
• Enable the SMTP client function
• Set the user authentication method
Set the authentication method when user authentication is necessary.
• Specify the SMTP server settings
• Specify the POP3 server settings
Specify the necessary settings when the user authentication method is POP3 (POP
before SMTP).
For details on the settings, see page 1-147 in section 1.17.3, "Configuring the SMTP
Client Function".
• Set the mail header
• Set the mail content
• Set alarm notification mail
Specify the necessary settings to send e-mails when alarms occur and are released.
• Set report generation notification mail
Specify the necessary settings to send e-mails when reports are generated.
• Set periodic mail
Specify the necessary settings to send periodic e-mails .
• Send mail when the power is turned on, when the GX/GP recovers from a
power failure, when the memory is full, or when an error occurs
For details on the settings, see page 1-148 in section 1.17.4, "Setting E-mail Transmission
Conditions (When the SMTP client function is on)".
1
2
3
4
5
App
Index
3-61